Close
BEI Sensors 9418/H5E Codificador
Features
- Bore reduction inserts (or sleeves) allow the user to reduce the bore size of the LP35 Series encoders from 30mm down to a size that matches to their mating shaft.
- The reduction insert provides both thermal and electrical isolation of the encoder from the shaft.
- Electrical isolation is rated at 2.5 kV.
- Proper installation is shown below and shaft runout should be limited according to this table.
Close
BEI Sensors 9418/H6E Codificador
Features
- Bore reduction inserts (or sleeves) allow the user to reduce the bore size of the LP35 Series encoders from 30mm down to a size that matches to their mating shaft.
- The reduction insert provides both thermal and electrical isolation of the encoder from the shaft.
- Electrical isolation is rated at 2.5 kV.
- Proper installation is shown below and shaft runout should be limited according to this table.
Close
BEI Sensors 9418/H7E Codificador
Features
- Bore reduction inserts (or sleeves) allow the user to reduce the bore size of the LP35 Series encoders from 30mm down to a size that matches to their mating shaft.
- The reduction insert provides both thermal and electrical isolation of the encoder from the shaft.
- Electrical isolation is rated at 2.5 kV.
- Proper installation is shown below and shaft runout should be limited according to this table.
Close
BEI Sensors 9418/H8E Codificador
Features
- Bore reduction inserts (or sleeves) allow the user to reduce the bore size of the LP35 Series encoders from 30mm down to a size that matches to their mating shaft.
- The reduction insert provides both thermal and electrical isolation of the encoder from the shaft.
- Electrical isolation is rated at 2.5 kV.
- Proper installation is shown below and shaft runout should be limited according to this table.
Close
BEI Sensors 9418/S20 Codificador
Downloads
- Accessory Reduction Hub for DSU9 Datasheet
- Accessory Reduction Hub for DSU9 PDF Drawing
- Accessory Reduction Hub to create 20mm ID bore on DSU9 STEP Drawing
- Accessory Reduction Hub for DSU9 DWG Drawing
Close
BEI Sensors 9418/S25 Codificador
Downloads
- Accessory Reduction Hub for DSU9 Datasheet
- Accessory Reduction Hub for DSU9 PDF Drawing
- Accessory Reduction Hub to create 25mm ID bore on DSU9 STEP Drawing
- Accessory Reduction Hub for DSU9 DWG Drawing
Close
BEI Sensors 9418/S25.4 Codificador
Downloads
- Accessory Reduction Hub for DSU9 Datasheet
- Accessory Reduction Hub for DSU9 PDF Drawing
- Accessory Reduction Hub to create 25.4mm ID bore on DSU9 STEP Drawing
- Accessory Reduction Hub for DSU9 DWG Drawing
Close
BEI Sensors 9432/06 Codificador
Features
- Metal sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9432/08 Codificador
Features
- Brass sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9432/10 Codificador
Features
- Brass sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9432/12 Codificador
Features
- Brass sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9432/12.7 Codificador
Features
- Brass sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9432/14 Codificador
Features
- Brass sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9432/9.52 Codificador
Features
- Brass sleeves ensure precision rotation and good mounting contact with mating shaft
- Variety of sizes available
- Provides secure fitting to encoder bore
Close
BEI Sensors 9435/001 Codificador
Downloads
- Accessory Shaft Key 4mm square Datasheet
- Accessory Metal shaft key 4mm square by 25mm long PDF Drawing
- Accessory Metal shaft key 4mm square by 25mm long STEP Drawing
- Accessory Metal shaft key 4mm square by 25mm long DWG Drawing
Close
BEI Sensors 9435/006 Codificador
Downloads
- Accessory Shaft Key 4mm square Datasheet
- Accessory Metal shaft key 4mm square by 12mm long PDF Drawing
- Accessory Metal shaft key 4mm square by 12mm long STEP Drawing
- Accessory Metal shaft key 4mm square by 12mm long DWG Drawing
Close
BEI Sensors 9435/009 Codificador
Downloads
- Accessory Shaft Key 4mm square Datasheet
- Accessory Shaft Key 9435/009 PDF Drawing
- Accessory Shaft Key 9435/009 STEP Drawing
- Accessory Shaft Key 9435/009 DWG Drawing
Close
BEI Sensors A1210 Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- EMC compliant to Level 3
- Direct power lead frame
- Epoxy free design
Close
BEI Sensors A1210-10 Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- EMC compliant to Level 3
- Direct power lead frame
- Epoxy free design
Close
BEI Sensors A1210-B Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- Direct power lead frame
- Epoxy free design
Close
BEI Sensors A1210E Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- EMC compliant to Level 3
- Direct power lead frame
- Epoxy free design
Close
BEI Sensors A1210E-10 Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- EMC compliant to Level 3
- Direct power lead frame
- Epoxy free design
Close
BEI Sensors A1210ET Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- Direct power lead frame
- Epoxy free design
Close
BEI Sensors A1210ET-10 Relé
Features
- Ratings from 10A to 40A @ 24-140 VAC
- SCR output for heavy industrial loads
- Zero voltage or instantaneous turn-on outputs
- UL/CSA/VDE Approved, CE Compliant to EN60950-1
- Improved SEMS screw and washer
- Redesigned housing with anti-rotation barriers
- AC or DC control
- Direct bond copper substrate
- Direct power lead frame
- Epoxy free design