The Magnum-Dimensions MS-PAE 120/240V Series Inverter/Charger is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PAE Series is powerful, easy-to-use, and best of all, cost effective. No series stacking required: The unique design of the MS-PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 volts.
BEI Sensors TCB-MS4448PAE Cargador
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| Input battery voltage range | 36 - 64 VDC |
| AC output voltage accuracy | 120/240 VAC split phase (± 5%) |
| Output frequency and accuracy | 60 Hz ± 0.1 Hz |
| Total Harmonic Distortion (THD) | < 5% |
| 1 msec surge current (amps AC) | Line-Neutral: 120, Line-Line: 70 |
| 100 msec surge current (amps AC) | Line-Neutral: 75, Line-Line: 40 |
| 5 sec surge power (real watts) | 8500 |
| 30 sec surge power (real watts) | 6000 |
| 5 min surge power (real watts) | 5400 |
| 30 min surge power (real watts) | 4800 |
| Continuous power output at 25° C | 4400 VA (L-L) |
| Maximum continuous input current | 144ADC |
| Inverter efficiency (peak) | 94% |
| AC Relay Transfer time (minimum) | 16 msecs |
| Power Consumption - searching | <6 watts |
| Power Consumption - inverting (no load) | 25 watts |
| Output Waveform | Pure Sine Wave |
Productos relacionados
Close
BEI Sensors Cargador
Features
- GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
- Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
- Status LED – Provides inverter operation mode and troubleshooting information at a glance.
- Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
- Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
- Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation.
Model Numbers
- 12LP10
- 12LP10H
- 12LP10R
Close
BEI Sensors MMA1212 Cargador
Features
- Waterproof Panel – The MMA boasts a waterproof switch and LED panel for use in the most rugged territory.
- Safe and Reliable – The MMA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
- Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
- Versatile Mounting – Mount the MMA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
- Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 16 VDC, the MMA Series will automatically shut down.
- Fan Cooled – The MMA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current Overload Protection – The MMA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Integrated Programming – The MMA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
- Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
- Buy with Ease – The MMA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
Close
BEI Sensors ME-AGS-N Cargador
Features
- Automatically start your generator – The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature.
- Adjust the AGS to meet your needs – With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC, the ME-AGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.**
- Two models are available – The stand alone version of the AGS (ME-AGS-S) works well for installation and operation without an inverter. The network version of the AGS (ME-AGS-N) allows operation of the AGS via the ME-RC or ME-ARC remote panel.
Close
BEI Sensors MS2000 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors ME-BMK Cargador
Features
Available Readings from the ME-BMK / ME-BMK-NS:- State of Charge (SOC) 0 - 100%
- DC volts
- DC amps
- Amp hours in/out
- Resettable amp hours out
- Total amp hours out
- Minimum volts DC
- Maximum volts DC
- Temperature compensated
- Auto detects input voltage
Close
BEI Sensors MS2012-15B Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS2812 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS4024-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.