The Magnum-Dimensions MS-PAE 120/240V Series Inverter/Charger is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PAE Series is powerful, easy-to-use, and best of all, cost effective. No series stacking required: The unique design of the MS-PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 volts.
BEI Sensors TCB-MS4024PAE Cargador
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| Input battery voltage range | 18 - 34 VDC |
| AC output voltage accuracy | 120/240 VAC split phase (± 5%) |
| Output frequency and accuracy | 60 Hz ± 0.1 Hz |
| Total Harmonic Distortion (THD) | < 5% |
| 1 msec surge current (amps AC) | Line-Neutral: 120, Line-Line: 70 |
| 100 msec surge current (amps AC) | Line-Neutral: 72, Line-Line: 40 |
| 5 sec surge power (real watts) | 5800 |
| 30 sec surge power (real watts) | 5200 |
| 5 min surge power (real watts) | 4800 |
| 30 min surge power (real watts) | 4500 |
| Continuous power output at 25° C | 4000 VA (L-L) |
| Maximum continuous input current | 266ADC |
| Inverter efficiency (peak) | 93% |
| AC Relay Transfer time (minimum) | 16 msecs |
| Power Consumption - searching | <6 watts |
| Power Consumption - inverting (no load) | 27 watts |
| Output Waveform | Pure Sine Wave |
Productos relacionados
Close
BEI Sensors ME-SBC Cargador
Features
- Voltage auto-detect feature recognizing 12 or 24 VDC.
- Transfers up to 25 amps.
- Solenoid drive for requirements greater than 25 amps.
- Over-temperature and over-current shutdown.
- Adjustable voltage settings with a wide range allows for charging flexibility.
- Bi-directional charging.
- Reverse polarity protection.
- Sense lead for long-run applications.
The Front Panel Includes
- LED indicators showing status and operation.
- Three adjustable voltage dials to set the “Connect Voltage”, “Low V Disconnect”, and “High V Disconnect.”
- An oversized power terminal block allowing for easy wire connections even if the wires are large.
- An accessories terminal block to add a solenoid or a separate voltage sense line.
- A reset switch.
Options
- The ME-SBC also works as a stand-alone unit.
Close
BEI Sensors Cargador
Features
- GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
- Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
- Status LED – Provides inverter operation mode and troubleshooting information at a glance.
- Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
- Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
- Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation.
Model Numbers
- 12LP10
- 12LP10H
- 12LP10R
Close
BEI Sensors MS2000 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors CSW412 Cargador
Features
- Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
- At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
- Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
- USB Port – Power and charge your USB-enabled device with the available USB port.
- GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
- Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
Close
BEI Sensors CSW1012 Cargador
Features
- Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
- At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
- Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
- USB Port – Power and charge your USB-enabled device with the available USB port.
- GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
- Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
Close
BEI Sensors MS2012-15B Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors ME-BMK-NS Cargador
Features
Available Readings from the ME-BMK / ME-BMK-NS:- State of Charge (SOC) 0 - 100%
- DC volts
- DC amps
- Amp hours in/out
- Resettable amp hours out
- Total amp hours out
- Minimum volts DC
- Maximum volts DC
- Temperature compensated
- Auto detects input voltage
Close
BEI Sensors ME-AGS-S Cargador
Features
- Automatically start your generator – The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature.
- Adjust the AGS to meet your needs – With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC, the ME-AGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.**
- Two models are available – The stand alone version of the AGS (ME-AGS-S) works well for installation and operation without an inverter. The network version of the AGS (ME-AGS-N) allows operation of the AGS via the ME-RC or ME-ARC remote panel.