The PTE7300 pressure sensor is the sensing platform from Sensata Technologies offering best-in-class accuracy with excellent mechanical shock resistance, EMC protection, and a fully hermetic IP69K package, to meet the most demanding applications in mid to high-pressure ranges.
Available with a wide range of ports, low power consumption, fast response time, and increased sensor diagnostics capabilities, these sensors enable simplified designs, allowing for a faster time-to-market.
| Pressure Ranges | 0-16 bar to 0-600 bar (0-230 psi to 0-8700 psi) |
| Pressure Reference | Gauge (Module) and Sealed Gauge (fully hermetic sensor) |
| Supply Voltage | 2.7 VDC to 5.5 VDC |
| Digital Interface | I2C with CRC (memory integrity, and data transmission) |
| Device Address | 0xDA (including CRC) 0x6C (excluding CRC) |
| Operating Current In Sleep Mode | 6.5 uA (typical) |
| Operating Current In Active Mode | 3.7mA typical (4mA maximum) |
| Available Data | Pressure (int16) Bridge temperature (int16) Status (int16) Device serial (int32) |
| Resolution | 13 bit |
| Response Time (12 bit) | < 1 ms |
| Probe Configurations | On-demand, single cycle |
| Recommended pull-up resistors | 1kOhm to 10kOhm, depending on cable length |
| External Capacitive Load for I2C Bus Line | 400 pF max (depends on the cable length) |
| ESD | ±4KV Contact; ±8KV Air |
| Radiated Immunity | 80-1000MHz 3V/m 1400-2000MHz 3V/m 2000-2700MHz 1V/m |
| Conducted Immunity | 0.15-80MHz 3Vrms |
| Magnetic Immunity | 3 A/m for 5 minutes |
