The Magnum-Dimensions MS Series Inverter/Charger is a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – 25-30% less AC current than standard chargers.
BEI Sensors MS4048 Cargador
Descripción
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| Input battery voltage range | 36 - 67.6 VDC |
| AC output voltage accuracy | 120 VAC ± 5% |
| Output frequency and accuracy | 60 Hz ± 0.1 Hz |
| Total Harmonic Distortion (THD) | < 5% |
| 1 msec surge current (amps AC) | 120 |
| 100 msec surge current (amps AC) | 72 |
| 5 sec surge power (real watts) | 8500 |
| 30 sec surge power (real watts) | 5750 |
| 5 min surge power (real watts) | 5250 |
| 30 min surge power (real watts) | 4750 |
| Maximum continuous input current | 133ADC |
| Inverter efficiency (peak) | 94% |
| AC Relay Transfer time (minimum) | 16 msecs |
| Power Consumption - searching | <8 watts |
| Power Consumption - inverting (no load) | 25 watts |
| Output Waveform | Pure Sine Wave |
Productos relacionados
Close
BEI Sensors MS2812 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors ME-SBC Cargador
Features
- Voltage auto-detect feature recognizing 12 or 24 VDC.
- Transfers up to 25 amps.
- Solenoid drive for requirements greater than 25 amps.
- Over-temperature and over-current shutdown.
- Adjustable voltage settings with a wide range allows for charging flexibility.
- Bi-directional charging.
- Reverse polarity protection.
- Sense lead for long-run applications.
The Front Panel Includes
- LED indicators showing status and operation.
- Three adjustable voltage dials to set the “Connect Voltage”, “Low V Disconnect”, and “High V Disconnect.”
- An oversized power terminal block allowing for easy wire connections even if the wires are large.
- An accessories terminal block to add a solenoid or a separate voltage sense line.
- A reset switch.
Options
- The ME-SBC also works as a stand-alone unit.
Close
BEI Sensors MMSA1012 Cargador
Features
- Waterproof Panel – The MMSA boasts a waterproof switch and LED panel for use in the most rugged territory.
- Safe and Reliable – The MMSA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
- Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
- Versatile Mounting – Mount the MMSA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
- Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 17 VDC, the MMSA Series will automatically shut down.
- Fan Cooled – The MMSA Series is fan cooled, enabling the unit to work well in confined spaces.If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current Overload Protection – The MMSA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Integrated Programming – The MMSA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
- Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
- Buy with Ease – The MMSA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
Close
BEI Sensors MS4024-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MMA1212 Cargador
Features
- Waterproof Panel – The MMA boasts a waterproof switch and LED panel for use in the most rugged territory.
- Safe and Reliable – The MMA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
- Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
- Versatile Mounting – Mount the MMA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
- Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 16 VDC, the MMA Series will automatically shut down.
- Fan Cooled – The MMA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current Overload Protection – The MMA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Integrated Programming – The MMA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
- Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
- Buy with Ease – The MMA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
Close
BEI Sensors MS2012-15B Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS2024 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors ME-AGS-N Cargador
Features
- Automatically start your generator – The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature.
- Adjust the AGS to meet your needs – With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC, the ME-AGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.**
- Two models are available – The stand alone version of the AGS (ME-AGS-S) works well for installation and operation without an inverter. The network version of the AGS (ME-AGS-N) allows operation of the AGS via the ME-RC or ME-ARC remote panel.