BEI Sensors MS3748AEJ Cargador
Click to enlarge
Previous product
BEI Sensors MS4024 Cargador
BEI Sensors MS2012 Cargador
Back to products
Next product
BEI Sensors TCB-MS4448PAE Cargador
BEI Sensors TCB-MS4024PAE Cargador

BEI Sensors MS3748AEJ Cargador

Descripción

Sensata Technologies now offers the MS3748AEJ Inverter/Charger for 120/240 VAC/50 Hz installations (Jamaica). The MS3748AEJ comes with all of the features you’ve come to expect from a Sensata | Magnum Dimensions brand product, including:

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

Safe and reliable: The MS3748AEJ is listed to the stringent CE requirements, ensuring the inverter/charger is safe and reliable.

Easy-to-install: Install the MS3748AEJ in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

Información adicional
Brand

Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
Input battery voltage 36 - 67.6 VDC
Nominal AC output voltage 120/240 VAC ±5%
Output frequency and accuracy 50 Hz ± 0.4 Hz
Total Harmonic Distortion (THD) < 5%
1 msec surge current (amps AC) 70
100 msec surge current (amps AC) 32
5 sec surge power (real watts) 6200
30 sec surge power (real watts) 6000
5 min surge power (real watts) 5400
30 min surge power (real watts) 4000
Continuous power output at 25° C 3700 VA
Maximum continuous input current 90 A @ 50.4 V
Inverter efficiency (peak) 91%
Transfer time ~ 20 ms
Search mode (typical) 10 watts
No load (230 VAC output, typical) 22 watts
Waveform Pure Sine Wave
SKU: MS3748AEJ Categoría:

Productos relacionados

BEI Sensors CSW412 Cargador
Close

BEI Sensors CSW412 Cargador

Features

  • Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
  • At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
  • Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
  • USB Port – Power and charge your USB-enabled device with the available USB port.
  • GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
  • Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
BEI Sensors MS4024 Cargador
Close

BEI Sensors MS2012-G Cargador

Features

  • Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
  • Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
  • Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
  • Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
BEI Sensors MMA1212 Cargador
Close

BEI Sensors MMA1212 Cargador

Features

  • Waterproof Panel – The MMA boasts a waterproof switch and LED panel for use in the most rugged territory.
  • Safe and Reliable – The MMA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
  • Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
  • Versatile Mounting – Mount the MMA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
  • Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 16 VDC, the MMA Series will automatically shut down.
  • Fan Cooled – The MMA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
  • Current Overload Protection – The MMA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
  • Integrated Programming – The MMA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
  • Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
  • Buy with Ease – The MMA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
BEI Sensors Cargador
Close

BEI Sensors Cargador

Features

  • GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
  • Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
  • Status LED – Provides inverter operation mode and troubleshooting information at a glance.
  • Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
  • Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
  • Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation.

Model Numbers

  • 12LP10
  • 12LP10H
  • 12LP10R
BEI Sensors MS4024 Cargador
Close

BEI Sensors MS4024-G Cargador

Features

  • Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
  • Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
  • Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
  • Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
BEI Sensors MMSA1012 Cargador
Close

BEI Sensors MMSA1012 Cargador

Features

  • Waterproof Panel – The MMSA boasts a waterproof switch and LED panel for use in the most rugged territory.
  • Safe and Reliable – The MMSA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
  • Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
  • Versatile Mounting – Mount the MMSA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
  • Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 17 VDC, the MMSA Series will automatically shut down.
  • Fan Cooled – The MMSA Series is fan cooled, enabling the unit to work well in confined spaces.If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
  • Current Overload Protection – The MMSA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
  • Integrated Programming – The MMSA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
  • Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
  • Buy with Ease – The MMSA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
BEI Sensors ME-SBC Cargador
Close

BEI Sensors ME-SBC Cargador

Features

  • Voltage auto-detect feature recognizing 12 or 24 VDC.
  • Transfers up to 25 amps.
  • Solenoid drive for requirements greater than 25 amps.
  • Over-temperature and over-current shutdown.
  • Adjustable voltage settings with a wide range allows for charging flexibility.
  • Bi-directional charging.
  • Reverse polarity protection.
  • Sense lead for long-run applications.

The Front Panel Includes

  • LED indicators showing status and operation.
  • Three adjustable voltage dials to set the “Connect Voltage”, “Low V Disconnect”, and “High V Disconnect.”
  • An oversized power terminal block allowing for easy wire connections even if the wires are large.
  • An accessories terminal block to add a solenoid or a separate voltage sense line.
  • A reset switch.

Options

  • The ME-SBC also works as a stand-alone unit.
BEI Sensors MS4024 Cargador
Close

BEI Sensors MS2024 Cargador

Features

  • Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
  • Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
  • Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
  • Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.