The Magnum-Dimensions MS Series Inverter/Charger is a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – 25-30% less AC current than standard chargers.
BEI Sensors MS2024 Cargador
Descripción
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| Input battery voltage range | 18 - 33.6 VDC |
| AC output voltage accuracy | 120 VAC ± 5% |
| Output frequency and accuracy | 60 Hz ± 0.1 Hz |
| Total Harmonic Distortion (THD) | < 5% |
| 1 msec surge current (amps AC) | 75 |
| 100 msec surge current (amps AC) | 37 |
| 5 sec surge power (real watts) | 2850 |
| 30 sec surge power (real watts) | 2750 |
| 5 min surge power (real watts) | 2700 |
| 30 min surge power (real watts) | 2200 |
| Maximum continuous input current | 133ADC |
| Inverter efficiency (peak) | 86% |
| AC Relay Transfer time (minimum) | 16 msecs |
| Power Consumption - searching | <8 watts |
| Power Consumption - inverting (no load) | 25 watts |
| Output Waveform | Pure Sine Wave |
Productos relacionados
Close
BEI Sensors CSW2012 Cargador
Features
- Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
- At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
- Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
- USB Port – Power and charge your USB-enabled device with the available USB port.
- GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
- Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
Close
BEI Sensors ME-BMK Cargador
Features
Available Readings from the ME-BMK / ME-BMK-NS:- State of Charge (SOC) 0 - 100%
- DC volts
- DC amps
- Amp hours in/out
- Resettable amp hours out
- Total amp hours out
- Minimum volts DC
- Maximum volts DC
- Temperature compensated
- Auto detects input voltage
Close
BEI Sensors MMS912E Cargador
Features
- Low/high battery protection – If your battery voltage reaches below 10 VDC or above 17 VDC, the MMS-E Series will automatically shut down.
- Versatile mounting – Mount the MMS-E Series on a shelf, wall, or even upside down.
- Fan cooled – The MMS-E Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current overload protection – The MMS-E Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Convenient switches – The MMS-E Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
- Circuit breaker protection – This model comes with built in input and output circuit breakers for ease of installation.
- Battery temp sensor – The standard battery temp sensor monitors temperatures from 0 - 50° C.
- Buy with ease – The MMS-E Series is backed by a two-year (24-month) parts and labor warranty.
Close
BEI Sensors CC-30 Cargador
Features
- Shunt topology with MOSFETs
- Accurate state of charge (SOC) determination
- Automatic detection of voltage
- PWM control
- Multistage charging technology
- Load disconnection depending on SOC
- Automatic load reconnection
- Temperature compensation
- Option to use negative earthing of one or positive earthing of several terminals
- Integrated data logger (energy meter)
- Evening, night light and daylight functions
- Integrated self test
- Monthly equalization charge
- USB charge socket for smartphones and tablets (CC-40 only
Model Numbers
- CC-30
- CC-40
Close
BEI Sensors MS2012-15B Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS4048 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors CSW2012-X Cargador
Features
- Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
- At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
- Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
- USB Port – Power and charge your USB-enabled device with the available USB port.
- GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
- Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
Close
BEI Sensors MS2000-20B Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.