BEI Sensors MMS912E Cargador

Features

• Automatically start your generator – The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature.
• Adjust the AGS to meet your needs – With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC, the ME-AGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.**
• Two models are available – The stand alone version of the AGS (ME-AGS-S) works well for installation and operation without an inverter. The network version of the AGS (ME-AGS-N) allows operation of the AGS via the ME-RC or ME-ARC remote panel.

Features

• Voltage auto-detect feature recognizing 12 or 24 VDC.
• Transfers up to 25 amps.
• Solenoid drive for requirements greater than 25 amps.
• Over-temperature and over-current shutdown.
• Adjustable voltage settings with a wide range allows for charging flexibility.
• Bi-directional charging.
• Reverse polarity protection.
• Sense lead for long-run applications.

The Front Panel Includes

• LED indicators showing status and operation.
• Three adjustable voltage dials to set the “Connect Voltage”, “Low V Disconnect”, and “High V Disconnect.”
• An oversized power terminal block allowing for easy wire connections even if the wires are large.
• An accessories terminal block to add a solenoid or a separate voltage sense line.
• A reset switch.

Options

• The ME-SBC also works as a stand-alone unit.

Features

• Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
• Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
• Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
• Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
• Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

Features

• GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
• Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
• Status LED – Provides inverter operation mode and troubleshooting information at a glance.
• Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
• Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
• Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation.

Model Numbers

• 12LP10
• 12LP10H
• 12LP10R