BEI Sensors MMA1212 Cargador
Click to enlarge
Previous product
BEI Sensors MMS912E Cargador
BEI Sensors MMS912E Cargador
Back to products
Next product
BEI Sensors MS4024 Cargador
BEI Sensors MS2012-20B Cargador

BEI Sensors MMA1212 Cargador

Descripción

The Sensata | Magnum Dimensions MMA Series Inverter/Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Ideal for Emergency Vehicles, the MMA is versatile, easy-to-use, lightweight, and provides a reliable base for your energy system.

Connect with Ease: The MMA comes with DC cables with Anderson quick connectors, a GFCI outlet, and an AC input cord.

Auxiliary DC Output Port: Add a small load, such as an interior lamp or backup camera, of less than 20 amps. MMA must be connected to the battery for the AUX output to be available.

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

Información adicional
Brand

Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
Input battery voltage 9 to 16 VDC
Nominal AC output voltage 120 VAC ± 5%
Output frequency and accuracy 60 Hz ± 0.1 Hz
1 msec surge current (amps AC) 42
100 msec surge current (amps AC) 23
5 sec surge power (real watts) 2100
30 sec surge power (real watts) 1750
5 min surge power (real watts) 1450
30 min surge power (real watts) 1375
Continuous power output at 45° C 1200 VA
Maximum continuous input current 160 ADC
Inverter efficiency (peak) 95%
Transfer time (typical) 16 msecs
Search mode (typical) 5 watts (with no remote)
No load (120 VAC output, typical) 18 watts (with no remote)
Waveform Modified Sine Wave
SKU: MMA1212 Categoría:

Productos relacionados

BEI Sensors MS4024 Cargador
Close

BEI Sensors MS2000-20B Cargador

Features

  • Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
  • Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
  • Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
  • Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
BEI Sensors ME-SBC Cargador
Close

BEI Sensors ME-SBC Cargador

Features

  • Voltage auto-detect feature recognizing 12 or 24 VDC.
  • Transfers up to 25 amps.
  • Solenoid drive for requirements greater than 25 amps.
  • Over-temperature and over-current shutdown.
  • Adjustable voltage settings with a wide range allows for charging flexibility.
  • Bi-directional charging.
  • Reverse polarity protection.
  • Sense lead for long-run applications.

The Front Panel Includes

  • LED indicators showing status and operation.
  • Three adjustable voltage dials to set the “Connect Voltage”, “Low V Disconnect”, and “High V Disconnect.”
  • An oversized power terminal block allowing for easy wire connections even if the wires are large.
  • An accessories terminal block to add a solenoid or a separate voltage sense line.
  • A reset switch.

Options

  • The ME-SBC also works as a stand-alone unit.
BEI Sensors CSW412 Cargador
Close

BEI Sensors CSW1012 Cargador

Features

  • Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
  • At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
  • Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
  • USB Port – Power and charge your USB-enabled device with the available USB port.
  • GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
  • Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
BEI Sensors MS4024 Cargador
Close

BEI Sensors MS2812-G Cargador

Features

  • Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
  • Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
  • Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
  • Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
BEI Sensors CSW412 Cargador
Close

BEI Sensors CSW2012-X Cargador

Features

  • Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
  • At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
  • Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
  • USB Port – Power and charge your USB-enabled device with the available USB port.
  • GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
  • Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
BEI Sensors ME-BMK-NS Cargador
Close

BEI Sensors ME-BMK-NS Cargador

Features

Available Readings from the ME-BMK / ME-BMK-NS:
  • State of Charge (SOC) 0 - 100%
  • DC volts
  • DC amps
  • Amp hours in/out
  • Resettable amp hours out
  • Total amp hours out
  • Minimum volts DC
  • Maximum volts DC
  • Temperature compensated
  • Auto detects input voltage
BEI Sensors MS4024 Cargador
Close

BEI Sensors MS2012-G Cargador

Features

  • Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
  • Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
  • Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
  • Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
BEI Sensors Cargador
Close

BEI Sensors Cargador

Features

  • GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
  • Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
  • Status LED – Provides inverter operation mode and troubleshooting information at a glance.
  • Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
  • Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
  • Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation.

Model Numbers

  • 12LP10
  • 12LP10H
  • 12LP10R