The Magnum-Dimensions CSW Series Inverter is a pure sine wave inverter designed to be powerful, yet simple to operate. The CSW will provide you with reliable AC power for troublefree use.
BEI Sensors CSW2012-X Cargador
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| Continuous power at nominal DC voltage | 2000 watts |
| Peak surge power | 4000 watts |
| 10 sec surge power | 2000 - 3000 watts |
| 1 sec surge power | 3000 - 4000 watts |
| 200 msec surge power | > 4000 watts |
| AC output voltage at 12.5 VDC | 120 VAC ± 5% |
| AC ouput current | 16.6 AAC |
| AC output voltage range | 104 - 127 VAC |
| AC output frequency | 60 Hz ± 0.5 Hz |
| AC output waveform | Pure sine wave |
| Total harmonic distortion [THD] | < 3% |
| Transfer Time | NA |
| USB | 5 V, 2.1 A |
Productos relacionados
Close
BEI Sensors CSW1012 Cargador
Features
- Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
- At-a-Glance Status – The inverter’s status can be determined at a glance with the easy-to-read LED light.
- Digital Display* – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes. (*not available on the CSW412)
- USB Port – Power and charge your USB-enabled device with the available USB port.
- GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
- Automatic Transfer Switch Option – The CSW2012-X automatically switches between shore power and inverter/battery power.
Close
BEI Sensors MMS912E Cargador
Features
- Low/high battery protection – If your battery voltage reaches below 10 VDC or above 17 VDC, the MMS-E Series will automatically shut down.
- Versatile mounting – Mount the MMS-E Series on a shelf, wall, or even upside down.
- Fan cooled – The MMS-E Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current overload protection – The MMS-E Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Convenient switches – The MMS-E Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
- Circuit breaker protection – This model comes with built in input and output circuit breakers for ease of installation.
- Battery temp sensor – The standard battery temp sensor monitors temperatures from 0 - 50° C.
- Buy with ease – The MMS-E Series is backed by a two-year (24-month) parts and labor warranty.
Close
BEI Sensors MS2812-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors ME-SBC Cargador
Features
- Voltage auto-detect feature recognizing 12 or 24 VDC.
- Transfers up to 25 amps.
- Solenoid drive for requirements greater than 25 amps.
- Over-temperature and over-current shutdown.
- Adjustable voltage settings with a wide range allows for charging flexibility.
- Bi-directional charging.
- Reverse polarity protection.
- Sense lead for long-run applications.
The Front Panel Includes
- LED indicators showing status and operation.
- Three adjustable voltage dials to set the “Connect Voltage”, “Low V Disconnect”, and “High V Disconnect.”
- An oversized power terminal block allowing for easy wire connections even if the wires are large.
- An accessories terminal block to add a solenoid or a separate voltage sense line.
- A reset switch.
Options
- The ME-SBC also works as a stand-alone unit.
Close
BEI Sensors ME-BMK-NS Cargador
Features
Available Readings from the ME-BMK / ME-BMK-NS:- State of Charge (SOC) 0 - 100%
- DC volts
- DC amps
- Amp hours in/out
- Resettable amp hours out
- Total amp hours out
- Minimum volts DC
- Maximum volts DC
- Temperature compensated
- Auto detects input voltage
Close
BEI Sensors ME-AGS-S Cargador
Features
- Automatically start your generator – The AGS is designed to automatically start your generator based on low battery condition or the inside room temperature.
- Adjust the AGS to meet your needs – With the ME-AGS-N you can set multiple parameters for starting and stopping the generator. Using the ME-RC, the ME-AGS-N has basic adjustments starting on battery voltage or temperature. When using the ME-ARC, the ME-AGS-N has advanced start and stop features, including battery voltage, time of day, AC amps, exercise time, and SOC.**
- Two models are available – The stand alone version of the AGS (ME-AGS-S) works well for installation and operation without an inverter. The network version of the AGS (ME-AGS-N) allows operation of the AGS via the ME-RC or ME-ARC remote panel.
Close
BEI Sensors MS4024-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS2000-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.