The Magnum-Dimensions CC Series Charge Controllers by Sensata Technologies provide exceptional control and state-of-charge determination via an easy-to-read LCD display. The large display shows operating modes with the aid of symbols, and the state of charge is represented visually in the form of a level meter. Voltage, current, and an energy meter can also be displayed. The CC-40 also features an integrated USB charging port for charging smartphones and tablets.
BEI Sensors CC-30 Cargador
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| OPERATING PERFORMANCE | ||
| System voltage | 12 V (24 V) | 12 V (24 V) |
| Power consumption | 12.5 mA | 18.5 mA |
| DC INPUT SIDE | ||
| Open circuit voltage solar module (at minimum operating temperature) | < 47 V | < 47 V |
| DC OUTPUT SIDE | ||
| Load current | 30 A | 40 A |
| USB charge socket | n/a | 5.2 V / 1.5 A |
| Reconnection voltage (SOC/LVR) | > 50% / 12.6 V (25.2 V) | > 50% / 12.6 V (25.2 V) |
| Deep discharge protection < 30% (SOC/LVD) | < 30% / 11.1 V (22.2 V) | < 30% / 11.1 V (22.2 V) |
| BATTERY SIDE | ||
| End-of-charge voltage | 13.9 V (27.8 V) | 13.9 V (27.8 V) |
| Boost charge voltage | 14.4 V (28.8 V) | 14.4 V (28.8 V) |
| Equalization charge | 14.7 V (29.4 V) | 14.7 V (29.4 V) |
| Set battery type | flooded (adjustable via menu) | flooded (adjustable via menu) |
| Charge current | 30 ADC | 40 ADC |
| ENVIRONMENTAL SPECIFICATIONS | ||
| Ambient temperature | 14° F to 122° F (-10° C to +50° C) | 14° F to 122° F (-10° C to +50° C) |
| PHYSICAL SPECIFICATIONS | ||
| Terminal (fine/single wire) | AWG 6 / 4 (16 mm2 / 25 mm2 | AWG 6 / 4 (16 mm2 / 25 mm2 |
| Degree of protection | IP 31 | IP 30 |
| Dimensions (width x height x depth) | 7.4” x 3.8” x 1.7” (187 mm x 96 mm x 44 mm) | 7.4” x 3.8” x 1.7” (187 mm x 96 mm x 44 mm) |
| Shipping dimensions (width x height x depth) | 7.6” x 4.1” x 2” (195mm x105mm x 50mm) | 7.6” x 4.1” x 2” (195mm x105mm x 50mm) |
| Weight | .77 lb (350 g) | .77 lb (350 g) |
| Shipping weight | 1 lb (450g) | 1.1 lb (480g) |
| GENERAL SPECIFICATIONS | ||
| Warranty | 5 years | 5 years |
Productos relacionados
Close
BEI Sensors ME-BMK-NS Cargador
Features
Available Readings from the ME-BMK / ME-BMK-NS:- State of Charge (SOC) 0 - 100%
- DC volts
- DC amps
- Amp hours in/out
- Resettable amp hours out
- Total amp hours out
- Minimum volts DC
- Maximum volts DC
- Temperature compensated
- Auto detects input voltage
Close
BEI Sensors MS2012-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS2000 Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS2812-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MS4024-G Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MMSA1012 Cargador
Features
- Waterproof Panel – The MMSA boasts a waterproof switch and LED panel for use in the most rugged territory.
- Safe and Reliable – The MMSA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
- Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
- Versatile Mounting – Mount the MMSA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
- Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 17 VDC, the MMSA Series will automatically shut down.
- Fan Cooled – The MMSA Series is fan cooled, enabling the unit to work well in confined spaces.If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current Overload Protection – The MMSA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Integrated Programming – The MMSA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
- Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
- Buy with Ease – The MMSA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.
Close
BEI Sensors MS4048-20B Cargador
Features
- Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
- Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
- Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
- Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
- Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
- Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
- Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
- Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.
Close
BEI Sensors MMA1212 Cargador
Features
- Waterproof Panel – The MMA boasts a waterproof switch and LED panel for use in the most rugged territory.
- Safe and Reliable – The MMA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
- Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
- Versatile Mounting – Mount the MMA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
- Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 16 VDC, the MMA Series will automatically shut down.
- Fan Cooled – The MMA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
- Current Overload Protection – The MMA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
- Integrated Programming – The MMA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
- Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
- Buy with Ease – The MMA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.