This is a versatile interface between an incremental encoder and receiving electronics. This unit accepts a 24 volt input from the encoder. It accommodates all standard operating voltages from 24 to 28 VDC and provides an output voltage that equals the input voltage. Up to eight Optical Isolator Modules can be daisy-chained to provide multiple, simultaneous outputs to controllers or PLC’s. This Optical Isolator can help clean up noisy signals by converting to a different line driver output. It has a 1 MHz throughput capability and can be used wherever a fast, optically isolated interface is required.
BEI Sensors 60001-010 Codificador
Pbtener un precio
Para recibir una propuesta, envíe su solicitud a info@tienda-sensores.es y especifique los puestos requeridos y los detalles de la empresa.
Especificación
| Output Code Format From Encoder | Dual Channel in quadrature with index and complements. Data lines are designated A, B, Z, A/, B/, Z/ at the module |
| Output Signal Type From Encoder | Differential line driver (Use Connection Instructions #1) Single ended line driver (Use Connection Instructions #2) Single ended open collector with pull-up resistors internal to encoder (Use Connection Instructions #3) Single ended, open collector (Use Connection Instructions #3) |
| Output Signal Voltage Level From Encoder | 24VDC |
| Frequency Response of Optical Isolator | 1 MHz, maximum |
| Power Requirements For Optical Isolator | 5-28 VDC ±5%, 75mA plus load current |
| Optical Isolator Output Options | 28V/V Line Driver, 100mA source/sink, Vout = Vin |
| Protection Level | Supply lines protected against over voltage to 60 volts and reverse voltage |
| Tristate Outputs | Available as –S Special Feature |
Productos relacionados
Close
BEI Sensors 01039-1945 Codificador
Features
- Compact size to fit in tight installations
- Well-sealed for dusty and wet environments
- Shielded against EMI
- Reverse voltage protection
- Over voltage protection
- Output protection diode
- Any resolution from 1 to 10000 is available
Close
BEI Sensors AHK514-16BT-002 Codificador
Features
- Absolute single-turn position with 16bits of resolution
- IO-Link COM3 with minimal cycle time of 1ms
- Easy programming with standard IO-Link tool
- Simple device replacement with Data Storage capability
- Universal power supply by IO-Link Master
- Robust and excellent resistance to shock and vibration
- High protection level IP65, IP67 option with a sealing flange
- Operating temperature range from -40°C to 85°C
- Standard M12 connector
Close
BEI Sensors 01079-054 Codificador
Features
- Synchronous transmission
- Transmission lengths to 1000 feet
- Accepts clock rates from 100 KHz to 1.8 MHz
Close
BEI Sensors AHM506-16BT-002 Codificador
Features
- Absolute single-turn position with 16bits of resolution
- IO-Link COM3 with minimal cycle time of 1ms
- Easy programming with standard IO-Link tool
- Simple device replacement with Data Storage capability
- Universal power supply by IO-Link Master
- Robust and excellent resistance to shock and vibration
- High protection level IP65, IP67 option with a sealing flange
- Operating temperature range from -40°C to 85°C
- Standard M12 connector
Close
BEI Sensors DHM510-PROG-011 Codificador
Features
- Incremental encoder with IO-link programmable parameters
- IO-Link COM3 with minimal cycle time of 1ms
- Absolute position available via IO-link
- Easy programming with standard IO-Link tool
- Simple device replacement with Data Storage capability
- Universal Electronic Circuits from 4.75 to 30 Vdc
- Robust and excellent resistance to shock and vibration
- High protection level IP65, IP67 option with a sealing flange
- Operating temperature range from -40°C to 85°C
- Standard M12 connector available
Close
BEI Sensors 01079-001 Codificador
Features
- Synchronous transmission
- Transmission lengths to 1000 feet
- Accepts clock rates from 100 KHz to 1.8 MHz