BEI Sensors 48IX10NV Cargador

Features

• Waterproof Panel – The MMA boasts a waterproof switch and LED panel for use in the most rugged territory.
• Safe and Reliable – The MMA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
• Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
• Versatile Mounting – Mount the MMA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
• Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 16 VDC, the MMA Series will automatically shut down.
• Fan Cooled – The MMA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
• Current Overload Protection – The MMA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
• Integrated Programming – The MMA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
• Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
• Buy with Ease – The MMA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.

Features

• Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
• Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
• Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
• Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
• Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

Features

• Compact and Lightweight - The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so it won't weigh you down.
• At-a-Glance Status - The inverter’s status can be determined at a glance with the easy to read LED light.
• Digital Display - The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes.
• USB Port – Power and charge your USB-enabled device with the available USB port.
• GFCI AC Outlet - Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.

Options

• Remote Switch - Use the optional CSW-RS remote switch for even easier on/off access away from the inverter. The CSW-RS comes with a 20’ cable.

Features

• Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
• Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
• Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
• Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
• Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.