Mostrando 1–24 de 38572 resultados

Show sidebar

BEI Sensors Accesorio

Downloads

  • ICAB-1 Cable USB to RS232/485 Adaptor Datasheet

BEI Sensors Acelerador

Features

• Available in small and large sizes • Configurable with up to 2 pushbuttons

BEI Sensors Cargador

Features

  • GFCI Outlet – Provides 120 VAC output as well as receptacle protection.
  • Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
  • Status LED – Provides inverter operation mode and troubleshooting information at a glance.
  • Low Battery Protection – Automatically shuts down at 10.5 VDC with in-rush delay. The end user may also select an optional setting of 11.7 VDC.
  • Battery Surge Protection – The 12LP10 has an input DC voltage range of 10.5 - 16 volts. The inverter can tolerate up to 24 VDC for five minutes, then will shut down to preserve the system.
  • Auto Sleep Mode – Auto sleep mode helps preserve battery life over long periods of no load operation.

Model Numbers

  • 12LP10
  • 12LP10H
  • 12LP10R

BEI Sensors Codificador

Features

  • Integrates seamlessly to competitive brands
  • Easy to install. No backer bar required.
  • High tolerance to shock and vibration
  • No regular maintenance or cleaning
  • IP67 Rating (completely submersible)
  • Travel lengths up to 13 meters

BEI Sensors Dispositivo IoT

Features

  • Suitable for liquids and gases
  • Pressure ranges from 0-1psi to 0-15psi gauge/abs
  • Up to 1640 ft line-of-site range (depending on receiver)
  • Piezo-resistive stainless steel sensor with stainless steel body
  • Five-year battery life at 10 second transmission update rate
  • Simple DIL switch pairing with the single or five channel receiver
  • Single or five channel receivers available
  • User-selectable transmission update rates
  • User-selectable 1-5V or 4-20 mA receiver outputs
  • Receiver clean contacts provide process alarm functions

BEI Sensors Habilitador de conectividad

Features

  • Robust, proven design leverages experience from delivering over 500M TPMS sensors in the field
  • Available in both Clamp-In and Snap-In Configurations, addressing a variety of vehicle speeds
  • Delivers same pressure, temperature, and auto-location capabilities as UHF parts delivered to market today
  • Capable of bi-directional wireless communication
  • Compatible with BLE v5.1
  • Programmable with Tire Details or new Advanced Features
  • Optimized for long battery life

Benefits

  • Allows for Over the Air Updates (OTA) to address issues in the field or to install additional features without your customers having to go to the shop
  • Facilitates robust cybersecurity implementations to help minimize threats to you and your customers
  • Enables new features such as Enhanced Tire Fill Assist, allowing you to use your mobile device to display real-time pressure when inflating tires
  • Can leverage existing BLE receiver infrastructure being introduced to support cell phones as smart keys, removing UHF receivers and reducing total system cost

BEI Sensors Interconexión

Downloads

  • One Piece Flat Packs Datasheet

BEI Sensors Interruptor

Features

RS1
  • This module is standard rocker switch with a single switch function in both directions.
RS2
  • With the RS2 a double switch function is available in both directions.
QS1
  • This module is a quad switch similar to a “mirror switch” made of four K12 switches, designed for 4 switching functions (e.g. for movements in four directions: up, down, left and right).
QS2
  • This module is similar to the QS1 but has a double switch function and is made up with eight K12 switches allowing additional functions ineach direction.

BEI Sensors Palanca de mando

Features

  • Contactless Hall-effect sensing technology
  • Life greater than 5 million cycles 
  • Integrated temperature compensation
  • Standard or customized multifunction grips

BEI Sensors Potenciómetro

Downloads

  • 600 Series Datasheet

BEI Sensors Protector

Features

  • Direct line break
  • Automatic reset
  • Compact and rugged construction
  • Provides start winding protection
  • Meets scroll and high side compressor requirements
  • Application range - 2HP to 6HP*
  • Tamperproof protection
  • Hermetically sealed

BEI Sensors Relé

Features

  • Ratings of 5A, 10A and 20A @ 3-100 VDC
  • CE and RoHS Compliant
  • 5, 12 and 24 VDC control input options
  • Mosfet Output
  • Thermal Pad Included
  • Plastic housing with min. 250 CTI rating (PLC2) for demanding applications

BEI Sensors Rocker

Features

  • Contactless sensing – Hall effect
  • Life greater than 2 million cycles
  • One sensor – optional second sensor for redundancy
  • Integrated temperature compensation
  • Short circuit protection

BEI Sensors Rompedore

Features

  • Miniature size
  • Light weight
  • Trip–free design
  • Current ratings 1 to 25 amps
  • High vibration resistance
  • High interrupting capacity
  • Coordinated ratings
  • AS58091 qualified (Also: Military Approvals, FAA PMA)
  • Typical end use: Aircraft power distribution systems

BEI Sensors Sensor

Downloads

  • CD115 Analog Datasheet

BEI Sensors Sistema de aire seco comprimido

Features

  • Removes the need for house air
  • Low power consumption
  • Up to 1cfm at 15psi air delivery
  • Less than -50°C air dewpoint
  • Continuous relative humidity (%RH) delivery monitoring
  • Low level noise
  • Rack mountable: 19in rack, 5U form factor
  • Bench mountable, remote positioning
  • Continuous operation

Applications

  • Purge air for temperature forcing systems
  • Direct supply for iQ-Phase system
  • Direct supply for Sensata liquid/air/LN2 systems

Cutting Edge. Clean. Dependable.

With its safe and continuous supply of clean dry air, the iQ-CDA system is designed to provide all your typical purge air requirements to supplement your temperature forcing system. Sensata Technologies has an exceptional history of more than 95 years and is a leading supplier of interconnect technology.

BEI Sensors Sistema de control

Downloads

  • K100 Datasheet
  • K100 ECU PDF Drawing
  • K100 ECU STEP Drawing
  • K100 ECU DWG Drawing
  • K100 PCU PDF Drawing
  • K100 PCU STEP Drawing
  • K100 PCU DWG Drawing

BEI Sensors Sistema de monitor

Features

  • 1/3” 960H color CCD image sensor
  • 6 IR LEDs for low light performance
  • Waterproof IP-67
  • Built-in heater
  • Aluminum die-cast housing
  • Photo sensor

BEI Sensors Sistema de monitoreo

Features

  • Software-based solution paired with existing TPM Sensors enabling easy vehicle integration
  • Developed for Light-duty Passenger Cars and Trucks
  • Compatible with wide variety of tire brands and models
  • Can be paired with Tire RFID to enable robust tracking of tire tread depth even through annual winter/summer tire swaps and rotations

Benefits

  • Improved vehicle safety, ADAS, and handling performance as the vehicle can adjust to the current condition of tires
  • Accuratey inform customers of their current tire health, allowing them to schedule maintenance at their convenience
  • With increased vehicle connectivity, Vehicle OEM's can monitor tire health and send proactive alerts for servicing
  • Supports future BEV maintenance strategies as scheduling shifts away from the oil change to tire maintenance
  • Enables Autonomous Vehicles and Commercial vehicle fleets to report tire health back to the fleet manager ensuring maximum uptime

BEI Sensors Termostato

Features

  • Incorporates the world leading Klixon® snap action bimetal
  • Line break / Automatic reset
  • Low profile permits the device to be installed directly on the compressor’s power terminal pins within a cluster block housing for closely coupled temperature monitoring
  • Enhanced over-temperature protection against running overload high / low voltage locked rotor loss of refrigeration charge shorted capacitor high discharge temperature
  • Rugged welded construction

BEI Sensors Velocidad

Features

  • Proven robust design
  • Dependable performance
  • Single and dual outputs available

BEI Sensors 01002-10023 Codificador

Features

  • Wide operating temperature range
  • Ruggedized, well-sealed unit for long life operation
  • Industry standard interfaces make it easy to install
  • Extensive electrical protection reduces damage due to miswiring
  • High noise immunity especially useful in electrically noisy automation environments
  • Selected configurations available in 1 to 3 days shipment (“Express Encoder” option)

BEI Sensors 01002-10109 Codificador

Features

  • Wide operating temperature range 
  • Ruggedized, well-sealed unit for long life operation
  • Industry standard interfaces make it easy to install
  • Extensive electrical protection reduces damage due to miswiring
  • High noise immunity especially useful in electrically noisy automation environments
  • Selected configurations available in 1 to 3 days shipment (“Express Encoder” option)

BEI Sensors 01002-10125 Codificador

Features

  • Wide operating temperature range 
  • Ruggedized, well-sealed unit for long life operation
  • Industry standard interfaces make it easy to install
  • Extensive electrical protection reduces damage due to miswiring
  • High noise immunity especially useful in electrically noisy automation environments
  • Selected configurations available in 1 to 3 days shipment (“Express Encoder” option)