Catálogo de productos

Features

• High Efficiency – The PT-100 provides typical 99% conversion efficiency and uses less than four watts of power in nighttime mode.
• MPPT – Maximum Power Point Tracking technology for increased PV power output efficiency.
• Voltage Options – Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage. The PT-100 will produce up to 100 amps regardless of battery voltage.
• Supports a Large PV Array – A single controller supports a large PV array up to 6600W. Larger PV arrays may be used because the PT-100 is current limited to 100 amps for maximum harvest.
• Optimal Battery Charging – Automatic battery temperature compensation using an included external temperature sensor for optimum battery charging, even during extreme temperature changes.
• Multi-stage Charging – Maximizes system performance and improves battery life.
• GFDI: Integrated PV Ground-Fault Detection and Interruption/ Indication, with pre-fault leakage/diagnostic metering.
• LED Indicators and Screen – Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information.
• On-site Updates – The PT-100’s software can be updated on site.
• Extensive Electronic Protection – Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection.
• AFCI – An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs.
• Convenient Installation – Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit.
• Easy MP and MMP integration – The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers.

Optional Remote (Requires Magnum Inverter)

• Built-in programmable auxiliary relay for device control.
• Internal data logging functionality keeps energy harvest information and battery Ahr/Whr data up to 255 days. Use the optional remote to display this information.

Model Numbers

• PT-100

Features

• Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
• Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
• Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
• Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
• Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

Features

• Pure Sine Wave – Power your TVs, computers, and other sensitive electronics without worry. The MS Series provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
• Accessible Design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter accessible.
• Choices – The MS Series comes in 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
• Versatile Mounting – Mount the MS Inverter/Charger on a shelf, bulkhead, or even upside down.
• Lightweight – The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
• Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
• Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
• Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

Features

• Waterproof Panel – The MMA boasts a waterproof switch and LED panel for use in the most rugged territory.
• Safe and Reliable – The MMA Series Inverter/Charger is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
• Attractive Styling – The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
• Versatile Mounting – Mount the MMA Series on a shelf, bulkhead (with DC terminals to the right), or even upside down.
• Low/High Battery Protection – If your battery voltage reaches below 10 VDC or above 16 VDC, the MMA Series will automatically shut down.
• Fan Cooled – The MMA Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
• Current Overload Protection – The MMA Inverter/Charger will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
• Integrated Programming – The MMA Series comes with an on/off front-mounted switch with an easy-to-read LED indicator. And easily toggle through settings with the accessible DIP switch.
• Battery Temp Sensor – Automatically adjusts the voltage set-points based on temperature for better charging performance and longer battery life.
• Buy with Ease – The MMA Inverter/Charger is backed by a two-year (24-month) parts and labor warranty.